Category
Smooth Extruded Board
YANTAI HUAMEL ENERGY_SAVING CONSTRUCTION MATERIAL CO.,LTD.is specialized in providing new supporting insulation materials.
Main production :Glass Wool、Extrusion Molding、Rubber And Plastic、Rock Wool、Aluminum Silicate、Polyurethane
Product description
HUAMEI brand extrusion and expanded polystyrene (XPS) thermal insulation boards are made with polystyrene. Through special process, the hard expanded board is extrded. Thereis a sealed and foamed structure, which is an environental protection material with theperformances of high-resist compression, waterproofo,moisture-proof, sir proof, light weight,anti-corrosion, long service life and low conductivity factor and so on.
HUAMEI brand extrusion and expanded polystyrene (XPS) thurmal al insulation boards can widely used as thermal insurance and moisture-proof materials for wall, concrete roof, steel-structure roof, lower-temperature storage floor, car platform, air landing strip, high-way and other fields. It can control rostheaying of the ground and really a high-quality and low price material.
During the production-process of Huamei extruded polystyrene (XPS) B1-class products, we use the high-quality heat rosistant flante retardants, and make them to mix with the main ingredient everily and thoroughly by asing worid' s most advanced mixing conveyor, so as to solve the problem of uneven distribution of flame retardants that exist in other domestic cmanufacturers. The produets B1 are in compliance with state regulations to alleviate the trepidation.
Huamei plastic extruded plates are serial products developed through special technique according to the red irements of exterior wull insulation system. For extemat insulation systern for thin plaster exterior wall, there are pattem coating and stucco coating (coarse stucco and firie Stucco) with both-side notches on the coating, whreh have the following features: easy and convertent operation, increased mortar adhesion area ansure hanced adhesion strength, and all of these ansure sound stability, weather resistance and durability of the external insulation system for the exterior wall. Huamei plastic extruded plates are the best choice for exterior wall insulation system.
Best and Long thermal insulation property
HUAMEI brand extrusion polystyrene(XPS) thermal insulation boards, with the conductivity factor of 0.028 W/m-k, has its good properties such as high thermal resistance and low linear expansion coefficient. Its conductivity factor is much lower than others such as EPS board, expanded polyurethane, thermal insulation plaster and cement perlite.Because of its stable chemical and physical structure, it has Best and Long thermal insulation properties, so it is oneof the best thermal insulation materials in the world.
Good Water-proof and Moisture-proof Properties
HUAMEI brand extrusion polystyrene (XPS)thermal insulation boards has intensive obturation structure. There is no any gaps at the surfaces of the board, so it has lowest water absorption, best moisture-proof property.
High-resist Compression Property
As the foamed strucrures are connected tightly, HUAMEI brand extrusion polystyrene (XPS) thermal insulation boards has high-resist compression, even through it is soaked in the vrate for a long time. It has best impuise strength if it is used for car platforin ari landing strip and high-way rood.
Ariti-corrosion and Long Service Life
Normal hard expanded thermal insulation materials will be aging after several years' service, which will reduce their water absorption property. Because of good water-proof and anti-corrosion.
Environmental Protection
HUAMEI themal insulation boards (XPS) has stable chemical structure which can not be resolved to release harmful wastes. It utilizes international advanced CO, foaming technique instead of traditional Freon foaming without Ozone Depletion. The harmful gas and waste water will be not produced in the production. The leftover bits andpieces can be reused, It is an environmertal protection material
Light and Hard
As the foamed structures are connected tightly, HUAMEI brand sxtrusion polystyrene (XPS) thermat inaulation boards is lightand hard, and is not ease to dsmage like as expanded polyurethane and phenolics resin. It is case to transport, install and cut. When it is used for thermal insulation of roof, it still has high compression of the struture.
Item
|
Unit
|
Size
|
Length
|
mm
|
1800,1200
|
Width
|
mm
|
600,900,1200,
|
Thick
|
mm
|
,20,25,30,40,50,60,70,80,90,100,-150
|
Item
|
Unit
|
Specification
|
Test Method
|
Compressive Strength
|
KPa
|
≥150
|
GB/T 8813-1988
|
Water absorption
|
%(V/V)
|
≤1.0
|
GB/T 8810-1988
|
Coefficient
|
ng/(m·s·Pa)
|
≤3.0
|
GB/T 2411-1998
|
Conductivity factor
Average temperature
10℃
25℃
|
W/(m·k)
|
≤0.028
≤0.030
|
GB/T 10294-1988
|
Dimension stability
|
%
|
≤1.5
|
GB/T 8811-1988
|
Oxygen index
|
|
≥26
|
GB/T 8626-1988
|
Previous
None
Next
None